EIMA International 2022 is over but you can still visit our booth using your PC or mobile device thanks to our Virtual Tour by clicking the button below:
Aermatica3D will be at EIMA 2022 , International Agricultural and Gardening Machinery Exhibition Bologna November 9-13, 2022
Aermatica3D manufactures several products for Agriculture for fast and precise biological control.
Aermatica3D is DJI Agriculture, maintenance center and unique DJI Academy center for Agriculture in Italy.
To discover Aermatica3D products see our page
To discover DJI Agriculture products see our page
Aermatica3D instroduces the new integrated solutions for DJI Matrice 300 RTK to measure gas concentrations and humidity, temperature and pressure data Sensor measures also PM1, PM2.5, e PM10.
Aermatica3D Multisensor is already used by the National Reaserch Centers and purchased by other industrial customers.
Register to the webinar Aermatica3D New Gas Sensor solution on DJI Matrice 300 RTK 01/06/2021, 17.00, CET
An article on Dronezine, an Italian magazine on drones, UAVs, and SAPR, talks about SFIDA, a project for distributing pesticides with drones against the olive fly; Aermatica3D has provided both DJI drones customized with Aermatica3D Liquid Distribution Kit and the BLY3D automatic distribution management software.
The project, funded by the Marche Region, has obtained a special derogation from the Ministry of Health to use this technology, also Hon. Tullio Patassini has presented to the Chamber of Deputies a law proposal that aims to develop these applications.
Here follow the link to reach the article on Dronezine:
https://www.dronezine.it/299351/droni-contro-la-mosca-dellolivo-in-italia-progetto-sfida/
The future in agriculture passes through drones, able to bring over crops, agrochemicals, fertilizers, seeds and useful insects, and any kind of sensors. So, the role of drones in the farms of the future was the topic at the event dedicated to agriculture and farming at Dronitaly 2021, with among the participants also Aermatica3D.
The journalist Tommaso Cinquemani talks about it in an article written for Agronotizie, the online magazine dedicated to agriculture's current events, innovations, and instrumentation.
To read the full article, click on the link below:
Paolo Marras, General Manager of Aermatica3D, was interviewed at Dronitaly, the reference event for civil drones for professional use held in Bologna from 6 to 8th October. Here is an excerpt from the interview:
What is the strength of Aermatica3D?
Paolo Marras : "The ability to base the solution on customer and the capacity to propose the best products on the market also with tailored integrations according to the customer's application needs. Aermatica3D carries out engineering activities with technologies and integrations that allow the research and development team to enlarge the ability of drones to reach an increasingly large audience. The latest integrations developed by Aermatica3D are Hyperspectral Chamber, Air Quality, and Radiation Sensors. All these characteristics allowed Aermatica3D to become a drone solutions provider and the ideal integrator between ideas, people, and technologies."
Here follow the link to read the full interview:
https://www.dronitaly.it/2021/09/aermatica3d-dronitaly-2021-parlano-protagonisti/
Aermatica3D participated at Dronitaly 2021, the reference event for civil drones and professional applications held in Bologna from 6th to 8th October. Aermatica3D presented to Dronitaly visitors the distribution kits of capsules, granules, powders, and insects useful for biological control in agriculture, the distribution kits of liquids for environmental treatments, and the flight termination systems designed to be easily installed on custom and DJI drones without invalidating the warranty.
To learn more about Aermatica3D products, visit our page:
https://www.aermatica.com/droni-integrazioni-kit-app-e-flight-controller/
Aermatica3D is an Italian company focused in the drone sector and constantly growing in the national and international market. Aermatica3D is Drone Solutions Provider, capable of developing applications and integrations of drones, kits, sensors and software to obtain the best solution according to the customer's needs. The application integrations developed represent the added value of Aermatica3D, Distributor and System Integrator DJI and HEXAERO. Aermatica3D is the ideal partner for the development of technologies based on drones aimed at industrial realities, research centers, government bodies and professional firms.
Aermatica3D will exhibit at EIMA 2018 with D-KIT, awarded by the premium of Technical Innovation.
From 7th to 11th of November will be at EIMA 2018, the most important international Agricultural and Gardening Machinery Exhibition in Italy and one of the most important in Europe.
You can find us at Hall 33 Ter, Booth B/2 – in the area organized by Dronitaly– with the innovative solution D-KIT, winner of the prize Technical Innovations, within the Competition organized since 1986 by FederUnaComa, whose goal is to identify, reward and enhance innovative products at the service of agricultural activities, in terms of improvement of production processes, safety and environmental sustainability.
D-KIT: innovation at the service of agriculture
The D-KIT Aermatica3D is a modular AUTOMATIC and VARIABLE RATE distributor for Drones for the distribution of LIQUIDS, POWDER, GRANULATES and CAPSULES products.
It is a very innovative tool because, with the same hardware and software, can be installed on drones with different payload capacities, and with the same user interface, it is possible to perform the targeted distribution, based on the GPS, and at a variable calibrated rate for liquid, powdered, granulated or capsule products.
Economic and time saving
The D-KIT allows cheap, fast, safe and non-invasive distribution, an alternative to manual or mechanized treatment, where this is not feasible or economical. The operator is not subjected to the difficult work of distribution in complex scenarios (steep slopes, not very accessible ..), the products are distributed in the right quantities and only where there is a need.
The distributions are variable and very fast:
The flights are totally automatic, based on plans generated on GPS coordinates and can follow the altitude of the terrain, thanks to precision elevation profiles obtained from drone; they are therefore repeatable and guarantee the result of the distribution
Targeted activities for organic farming for everyone
The system consists of the kit installed on the drone enables targeted activity (biological control, pollination, air treatments ...), using a non-polluting proximity air tool, because it is electric and precise.
Thanks to the level of industrialization achieved, the D-KIT is, moreover, easily usable directly by farmers and service providers for carrying out field activities, without the need for the continuous intervention of technicians, after a simple and short training.
D-KIT - Technical features
The D-KIT consists of a tank of different sizes, the actuators (the pump or the distribution system of the granulated or powdered product, the capsule distribution mechanism), an output system (one or more liquid nozzles, a hole for granules or powder, 4 redundant channels for the capsules). The kit, installed on board, is characterized by an electronic control and a software that communicates with the drone, from which it acquires in real time the flight parameters. Flight and automatic distribution are planned simply via an APP on a tablet, which communicates with the kit during the flight. The D-KIT is modular and can be applied to different drones, depending on the application:
Find out more at Hall 33 Ter, Booth B / 2.
Contact us for information and any discounts to access EIMA 2018.
Regione Autonoma Valle D’Aosta Fire Brigades Drone Department, highly specialized on Search & Rescue, has chosen the DJI Matrice 210 RTK drone.
DJI Matrice 210 RTK is the flagship drone of DJI ENTERPRISE and represents the stat-of-the-art of drones for industrial applications.
Among the principal characteristics that make the DJI Matrice 210 RTK the ideal system for complex applications in difficult scenarios, they can be mentioned:
Moreover, DJI Matrice 210 can carry at the same time two very high performances cameras as Z30, 30X Optical Zoom and smart pointing functions, and Zenmuse XT, radiometric FLIR thermal camera integrated on a stabilized three axis gimbal.
The system equipped with those two sensors represents the ideal and affordable tool to carry out critical activities such as those of the Fire Brigade's drone department.
Moreover Valle D’Aosta Fire Brigades Corp is experimenting the Aermatica3D software to manage mission definition procedures, flight planning, automatic flight execution and integrated reporting procedures.
Aermatica3D has in fact developed a proprietary application, based on DJI SDK, that allows the management of all the DJI drone functionalities and the accurate planning of the flights considering high-resolution altimetric profile in the very complex mountains flight scenarios.
